Selection of Force Creation Method for Press Forming Machinery

作者:Tolvanen, Jarno; Leminen, Ville; Tanninen, Panu; Varis, Juha; Matthews, Sami 刊名:Procedia Manufacturing 上传者:杨娅

【摘要】

全文阅读

2351-9789 © 2017 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). Peer-review under responsibility of the scientific committee of the 27th International Conference on Flexible Automation and Intelligent Manufacturing doi: 10.1016/j.promfg.2017.07.140 Procedia Manufacturing 11( 2017 ) 482 – 489 Available online at www.sciencedirect.com ScienceDirect 27th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM2017, 27-30 June 2017, Modena, Italy Selection of force creation method for press forming machinery Jarno Tolvanena, Ville Leminena*, Panu Tanninena, Juha Varisa, Sami Matthewsa aLappeenranta University of Technology, Skinnarilankatu 34, Lappeenranta, FI-53850, FINLAND Abstract Environmental aspects have become increasingly important in today's business. In packaging industry this has created an increased demand for fibre-based packaging solutions which present a renewable and environmentally friendly alternative for oil based materials. One of such materials is paperboard, and for example trays made of paperboard can be an alternative for traditionally used plastic trays in food packaging. Nowadays there is a need for cost-effective small scale machinery. In this study the objective was to define the best method to produce the force needed in the compact paperboard tray pressing machine. Two different force creation methods were studied in t

参考文献

引证文献

问答

我要提问